|
|||||||||||||||||||||||||||||||||
|
|||||||
|
|
|
|
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
#1 |
|
Newbie
![]() |
Neutral
:
0 rank
We recently added a 3/4 bathroom on our third floor of a ballon framed house built in 1911. The beams between the second and third floor were reinforced because they were only 6inches. We have noticed a sagging of the third floor right over where the reinforced beams were placed. Is this causing major structural damage?
|
|
|
|
|
|
#2 | |
|
Newbie
![]() |
Neutral
:
0 rank
Quote:
If possible run a beam perpendicular to the joists on each level from ground floor up. These will be supported by posts or columns. |
|
|
|
|
| sponsor links |
|
|
#3 |
|
Newbie
![]() |
Neutral
:
0 rank
When you say beams do you mean flor joists? Do you remember how they were reinforced?
Inanton is correct in that you can correct floor sag by installing a beam that is perpendicular to the joistsd but most likely you do not have the space for this and the rooms are probably finished. This is a structural repair and should be evaluated by a structural engineer. The fix will most likely involve installing new, code compliant floor joists.
__________________
~ Robert Robillard " Quality means doing things right when no one is looking " ~ Henry Ford |
|
|
|
![]() |
| sponsor links |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|